General operation, Xdm7615 operation – Dual XDM7615 User Manual
Page 6

6
XDM7615
OPERATION
With the unit off, press EJECT to allow the front panel to
slide down. Gently squeeze the release tab located on the
bottom center underside and pull front panel down and away
from unit to remove. To install, insert left side first, then
push right side to secure.
Press POWER or any other button (except EJECT or OPEN) to
turn the unit on. Press POWER to turn the unit off.
Press MODE to select between AM/FM, CD player and
auxiliary input. Modes of operation are shown in the display.
NOTE: CD mode will not appear unless a CD is inserted.
Insert a 3.5mm connector into the front panel AUX port.
Connect the other end of the 3.5mm connector to the
headphone output of an audio device, MP3 player, etc. Press
MODE to select AUX mode.
The steering wheel interface input located on the back of
the head unit allows connection to the Pacific Accessory
Corporation (PAC) SWI-PS interface module (sold separate-
ly). Visit www.pac-audio.com for details.
To configure steering wheel controls, follow the instructions
provided with the PAC SWI-PS interface module. After
installing the interface module, insert the module's 3.5mm
jack into the port on the back of the head unit.
Adjust volume using rotary encoder (00-46).
Press and hold
POWER
for 2 seconds to program currently
selected volume level.
"P-VOL"
and the current volume level
will momentarily appear in the display.
Press EQ to select between POP, JAZZ, CLASSIC, BEAT,
ROCK and OFF (default) equalization curves. Any adjustment
to the Bass or Treble settings automatically cancels the
current EQ curve (if one is selected).
Press DISP to select between clock and different types of
information, such as radio frequency, CD track/elapsed time
or MP3/WMA song information.
Press RESET upon initial installation or if abnormal
operation occurs. Reset button is located on the front panel.
Front Panel Removal
Power On/Off
Mode
Auxiliary Input
Steering Wheel Interface
Input
Volume
Programmable
Turn-On Volume
Preset EQ Curves
Display
Reset
General Operation