Kairak Undercounters (KU) - Manual (Page 14)

Undercounter Refrigerators and Freezers
PAGE 14
7E - EntER tHE sERVIcE AccEss:
Use the security code 0, A, 1 and the following instructions:
Press the set button . The display will read Service Access.
Press the set button .
The display will show three zeros with the left zero flashing
Press the set button .
The display will show three zeros with the center zero flashing
Press the down arrow key to sequence through F, E, d, C, b, A, 9, 8, 7,…etc.
When you reach A press set .
The display will show zero, A, zero with the right zero flashing
Press the up arrow key to sequence through 1, 2, 3, 4, 5, 6, 7, 8, 9, A, b,…etc.
When you reach 1 press set .
The display will read Thermostat Set Point High. Press to view
and again to exit.
You are now in the SERVICE PARAMETERS.
SET
SET
SET
SET
SET
SET
SET
7. MIcRoPRocEssoR contRol
(cont.)