JLCooper MCS3 MIDI - Manual (Page 11)

MIDI Machine Control (MMC)
All message are machine id of 7Fh (All Machines). Tally replies
are not needed for LED operation, but are needed for "Taught
Locates" operation.
Control Sends Control Sends
Rewind Rewind V-Stick Down Reverse 2x Speed
Fast Forward Fast Forward V-Stick Up Forward 2x Speed
Stop Stop V-Stick Left Reverse 1x Speed
Play Play V-Stick Right Forward 1x Speed
Record Record***
W1 Locate 1* F1 Track 1/5 **
W2 Locate 2 F2 Track 2/6
W3 Locate 3 F3 Track 3/7
W4 Locate 4 F4 Track 4/8
W5 Locate 5 F5 Shift to 1st 4 tracks
W6 Locate6 F6 Shift to 2nd 4 tracks
W7 Pause
*Locates: When first powered up, the MCS
3
sends General Purpose
"GP" type locates, that is, it recalls locates already stored within
controlled device, GP0 thru GP5. The MCS
3
may be "taught"
locations either on the fly or stationary by pressing and holding the
Record button, then pressing W1 thru W6. A location request will be
sent, and the response stored within the MCS
3
. This will be
remembered until power is removed.
**Track Arming: Access to 8 tracks is attained by using buttons F5 &
F6 as shift buttons. Press F5, then F1 thru F4 control tracks 1 thru 4,
press F6, and then F1 thru F4 control tracks 5 thru 8.
*** The Record button is interlocked with the Play button.
To go to Record, you must hold down one and push the other.
While in Record, pressing Play sends a RECORD EXIT strobe,
dropping the controlled unit out of the record state.
Specifications
Dimensions: ................... 6.5" X 7" X 1.25"
Shipping Weight ............ 3.7 lbs.
Care and Service
If properly cared for, your MCS
3
should provide years of
trouble-free performance. Avoid dropping the MCS
3
, or hard
banging on the keys. Please refer to the really fine print
following for detailed warranty and service information.
11