JLCooper MCS3 9 Pin - Manual (Page 8)

8
Locate Functions
The MCS
3
may be “taught” locations either on the fly (program
is playing) or while stationary (program is stopped.)
Locates are stored by pressing and holding the Record button,
and while holding the Record button, press W1 thru W6.
A location request will be sent, and the response stored within
the MCS
3
. This will be remembered until power is removed
from the MCS
3
.
The MCS
3
stores six locate points:
• W1 Locate 1
• W2 Locate 2
• W3 Locate 3
• W4 Locate 4
• W5 Locate 5
• W6 Locate 6