JLCooper MCS2 MIDI - Manual (Page 10)

10
Additional MCS
2
Features
Return to Zero
Pressing Option and Rewind will result in an MMC command:
Locate to 00:00:00:00.
Shuttle Back at Play Speed
Pressing Shift and Rewind will result in an MMC command:
Shuttle backwards at 1 X play speed.
"MMC Only" or "Controllers Only" Modes
The MCS
2
normally sends MMC, Controllers, and Sysex.
It sends these commands all at the same time.
There may be some circumstances where you might want the
MCS
2
to only send one command set.
There are three special modes of operation that allow it to send
only one set of commands.
For Controllers only, and no MMC or Sysex, power up the MCS
2
while holding the Rewind key.
For MMC only, and no Controllers or Sysex, power up the MCS
2
while holding the Fast Forward key.
For Sysex only, and no MMC or Controllers, power up the MCS
2
while holding the Stop key.
Since the MCS
2
has no memory of the last mode used, this
would be done each time the unit is powered up.