JLCooper TX Midnight Eclipse - Manual (Page 6)

Connecting the Eclipse TX Midnight
The Eclipse TX Midnight connects directly to a master unit with a
four pin expander cable. Simply connect one end of the cable to
the Eclipse TX Midnight and the other end to a master unit such as
the Eclipse SX Midnight.
Power
Normally, the Eclipse TX Midnight receives its power from the
power connector from the rear panel and the power switch
switches the power to the unit.
When the Eclipse TX Midnight is connected to a master unit such
as an Eclipse SX Midnight, the Eclipse TX Midnight receives its
power from the master unit via the modular expander cable. In this
case, do not use the power connector or power switch on the rear
of the Eclipse TX Midnight. Instead, use the power connector and
power switch on the rear of the master unit.
Note: If the Eclipse TX Midnight is connected to a master unit such
as the Eclipse SX Midnight, DO NOT use the power connector or
power switch on the Eclipse TX Midnight.
Power switch and power
connector are not functional
when Eclipse TX Midnight is
connected to a master unit
Use this power switch and
power connector when
Eclipse TX Midnight is
connected to a master unit
6