Jetway Computer NC81 - Manual (Page 28)

24
3-8 Power Management Setup
The Power Management Setup allows you to configure your system to most effectively save
energy saving while operating in a manner consistent with your own style of computer use.
Phoenix – AwardBIOS CMOS Setup Utility
Power Management Setup
Item Help
ACPI function Enabled
ACPI Suspend Type S1(POS)
C2 Disable/Enabled Disabled
ne Power Management Option USER Defi
HDD Power Down Disabled
SYNC+Blank Video Off Method V/H
Modem USE IRQ 3
f Soft-off by PWRBTN Instant-of
Power on by PCI Card Disabled
ACPI XSDT Table Enabled
HPET Support Enabled
Power On By Keyboard Disabled
Power On By Mouse Disabled
led RTC Alarm Resume Disab
Date (of Month) 0
Resume Time (hh:mm:ss) 0:0:0
Menu Level >
↑↓→←
elp Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General H
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
ACPI Function
This item allows you to Enabled/Disabled the Advanced Configuration and Power
Management (ACPI). The settings are Enabled and Disabled.
HDD Power Down (Disabled)
The IDE hard drive will spin down if it is not accessed within a specified length of
time.Options are from 1 Min to 15 Min and Disable.
Video Off Method
This determines the manner in which the monitor is blanked.
DPMS (default) Initial display power management signaling.
Blank Screen This option only writes blanks to the video buffer.