Jetway Computer NC98 - Manual (Page 23)

18
Auto: enables LBA Mode if the devices support it and the device is not already
formatted with LBA Mode disabled.
Block (Multi-Sector Transfer): The optional settings are: Disabled and Auto.
Disabled: The Data transfer from and to the device occurs one sector at a time.
Auto: The Data transfer from and to the device occurs multiple sectors at a time if the
device supports it.
PIO Mode: the optional settings are: Auto, 0, 1, 2, 3 and 4. Use the item to select PIO
mode
DMA MODE: the optional settings are Auto, SWDMAn, MWDMAn , UDMAn.
S.M.A.R.T.: This option allows you to enable the HDD S.M.A.R.T Capability
(Self-Monitoring, Analysis and Reporting Technology). The optional settings are Auto;
Disabled; and Eabled.
32 Bit Data Transfer: the optional settings are: Disabled; Enabled.
Enable/disable 32-bit data transfer.
JMicron SATA Channel 3/4
While entering setup, BIOS auto detects the presence of IDE devices. This displays
the status of auto detection of IDE devices.
System Memory
This item will show information about the memory modules(s) installed.
3-5 Advanced BIOS Features