Jetway Computer NF99FL - Manual (Page 35)

30
PS2 KB/MS SWAP Select
The optional settings are: Keyboard First; Mouse First.
Serial Port 1/2 Address
This item allows BIOS to select base addresses for serial port 1/2.
Serial Port 2 Mode
The optional settings
are：Normal; IrDA(1.6us); IrDA(3/16 bit).
Serial Port 2 RS485 Select
The optional settings
are：Disabled(RS232); Enabled(RS485)
Parallel Port Address
Use this item to allow BIOS to select parallel port base adresses.
Parallel Port Mode
The optional settings are: Normal; Bi-Directional; ECP; EPP; ECP & EPP.
Watchdog Timer Select
This item is used to activate the watchdog function. The optional settings are: Enabled;
Disabled.
When set as Enabled, The following sub-items shall appear:
WatchDog Timer Val: User can type a number in the range of 4 to 255.
WatchDog Timer Unit: The optional settings are: Sec.; Min..
3-8 Power Management Setup
The Power Management Setup allows you to configure your system to most
effectively save energy saving while operating in a manner consistent with your own
style of computer use.