Jetway Computer NF9N User Manual
Page 44
39
[288M]; [320M]; [352M]; [384M]; [416M]; [448M]; [480M]; [512M].
DVMT Total Gfx Mem
Use this item to select DVMT 5.0 total graphics memory size used by the internal
graphics device.
The optional settings are: [128M]; [256M]; [MAX].
Aperture Size
The optional settings are: [128MB]; [256MB]; [512MB].
GTT Size
The optional settings are: [1MB]; [2MB].
IGD Turbo Enable
The optional settings are: [Enabled]; [Disabled].
Spread Spectrum Clock
The optional settings are: [Enabled]; [Disabled].
IGD Boot Type
Use this item to select preference display interface used when system boot.
The optional settings are: [Auto]; [CRT]; [HDMI]; [LVDS].
* Note: User needs to set ‘Active LVDS’ as [Enabled], otherwise the optional
setting [LVDS] will not be available.
Active LVDS
The optional settings are: [Disabled]; [Enabled].
[Disable]: VBIOS disable LVDS.
[Enable]: VBIOS enable LVDS.
* Note: When set as ‘Enabled’, user can make further settings in ‘LVDS Panel
Type’.
LVDS Panel Type
Use this item to manually select LVDS panel type.
The optional setting are: [800x 600 18bit Single]; [800x 600 24bit Single]; [1024 x
600 18bit Single]; [800x 480 18bit Single]; [1024 x 768 18bit Single]; [1024 x 768
24bit Single]; [1280 x 768 24bit Single]; [1280 x 1024 24bit Dual]; [1366 x 768 18bit
Single]; [1366 x 768 24bit Single]; [1440 x 900 18bit Dual]; [1440 x 900 24bit Dual];
[1280 x 800 18bit Single]; [1280 x 800 24bit Single]; [1680 x 1050 24bit Dual];