Jetway Computer NF9VT - Manual (Page 37)

32
Use this item to select an optimal setting for super IO device.
Device Mode
Use this item to change the printer port mode.
The optional settings are: [STD Printer Mode]; [SPP Mode]; [EPP-1.9 and SPP
Mode]; [EPP-1.7 and SPP Mode]; [ECP Mode]; [ECP and EPP 1.9 Mode]; [ECP
and EPP 1.7 Mode].
OS Select for Serial Port
The optional settings are: [Windows]; [LINUX].
ERP Support
The optional settings: [Enabled]; [Disabled].
This item should be set as [Disabled] if you wish to have all active wake-up
functions.
Case Open Detect
This item controls detect case open function.
The optional settings are: [Enabled]; [Disabled].
PS2KB/MS Connect
Use this item to set PS2 connect primary device.
The optional settings are: [Keyboard First]; [Mouse First].
WatchDog Timer
Use this item to enable or disable WatchDog Timer Control. When set as
[Enabled], the following sub-items shall appear:
WatchDog Timer Value
User can set a value in the range of [10] to [255].
WatchDog Timer Unit
The optional settings are: [Sec.]; [Min.].
WatchDog Wake-up Timer in ERP
This item support WDT wake-up while ‘ERP Support’ is set as [Enabled].
The optional settings are: [Enabled]; [Disabled].
When set as [Enabled], the following sub-items shall appear:
WatchDog Timer Value in ERP