Jetway Computer NF9A - Manual (Page 34)

29
PCH 1.8V Voltage
Use this item to select a value for PCH 1.8V voltage.
PCH 1.08V Voltage
Use this item to select a value for PCH 1.08V voltage.
DRAM Voltage select
Use this item to select a value for DDR3 DRAM voltage.
► Shutdown Temperature Configuration
Use this item to select system shutdown temperature.
► Serial Port Console Redirection
Console Redirection
The optional settings: [Enabled]; [Disabled].
Console Redirection Settings
The settings specify how the host computer and the remote computer (which the
user is using) will exchange data. Both computers should have the same or
compatible settings.
Press [Enter] to make settings for the following sub-items:
Out-of-Band Mgmt Port
This Microsoft Windows Emergency Management Service (EMS) allows for a
remote management of a Windows Server OS through a serial port.
Terminal Type
The optional settings: [VT100]; [VT100+]; [VT-UTF8]; [ANSI].
Bits per Second
Use this item to select serial port transmission speed. The speed must be matched
on the other side. Long or noisy lines may require lower speeds.
Flow Control
The optional settings: [None]; [Hardware RTS/CTS]; [Software Xon/Xoff].