Jetway Computer NF9QU - Manual (Page 37)

32
Shutdown Temperature
Use this item to select system shutdown temperature.
The optional settings are: [Disabled]; [70
o
C/156
o
F]; [75
o
C/164
o
F]; [80
o
C/172
o
F];
[85
o
C/180
o
F]; [90
o
C/188
o
F].
 SmartFan Configuration
Press [Enter] to make settings for SmartFan Configuration:
SmartFan Configuration
CPUFAN / SYSFAN1/ SYSFAN2 Smart Mode
The optional settings are: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:
CPUFAN / SYSFAN1/ SYSFAN2 Full-Speed Temperature
Use this item to set CPUFAN/SYSFAN1/ SYSFAN2 full speed temperature. Fan
will run at full speed when above this pre-set temperature.
CPUFAN / SYSFAN1/ SYSFAN 2 Full-Speed Duty
Use this item to set CPUFAN/SYSFAN1/ SYSFAN2 full speed duty. Fan will run at
full speed when above the pre-set duty.
CPUFAN / SYSFAN1/ SYSFAN 2 Idle-Speed Temperature
Use this item to set CPUFAN/SYSFAN1/ SYSFAN2 idle speed temperature. Fan
will run at idle speed when below this temperature.
CPUFAN / SYSFAN1/ SYSFAN2 Idle-Speed Duty
Use this item to set CPUFAN/SYSFAN1/ SYSFAN2 idle speed duty. Fan will run at
idle speed when below the pre-set duty.
SYSFAN2 Type
The optional settings are: [4-Pin]; [3-Pin].
*Note: We recommend user to select fan type according to the specific fan
connected to fan connector, i.e. to select [3-Pin] for fan with 3-Pin connector, or
select [4-Pin] for fan with 4-Pin connector.