beautypg.com

JayBird JF3 User Manual

Sec ur e f it sec ur e f it, En 6

background image

REGISTER YOUR LIFETIME WARRANTY NOW

Immediate registration of purchase date, place and receipt number

required for your JayBird Lifetime Warranty Against Sweat

jaybirdgear.com/intheclubnow

1

SECURE FIT FOR SPORT
Finding the right size sports ear cushion will secure
your buds and liberate your workout.

2

GOOD VS GREAT PERFORMANCE

Because everyone’s ears are different,

make sure to try out all sizes of eartips.

Only with the perfect size of eartips will you

enjoy a snug fit and optimum sound quality.

3

4

5

JF3 Freedom Bluetooth Headphones User Manual

In the box

JF3 Freedom Bluetooth Headphones
Limited Edition Premium Magnet Sealed JayBird Carry Case
3 pairs regular eartips (S,M,L)
3 pairs secure fitting sport ear cushions (S,M,L)
1 pair of optional ear hooks
USB Cable
User Manual

Charging for first use

Charging the battery before use is recommended but not required.
The headphones ship pre-charged however initial charge will vary.
Low battery is indicated by the status indicator blinking red with an
audible tone every 20 seconds. Connect charging cable with the
charging port of headphones under the USB cover on the right earpiece.
Connect cable to the USB slot of any PC or Mac. The status indicator will
be red while charging and will turn off when fully charged. JayBird also
offers an AC power adapter which your USB cable can plug into.
AC power adapter sold separately.

Pair mode

Begin with headphones powered
off. Push and hold center button
for 6-8 seconds until status
light alternates red and blue.
You are now in pair mode.
See your phone/music device
manual for pair instructions.
Passcode is 0000.

8 sec

Pair Mode (detailed step by step instructions)

1. Keep the headphones and mobile phone in the range of 1 meter when pairing.
2. Put the headphones into pairing mode by pushing the center button for 8 seconds
(LED will flash red and blue).
3. Start the Bluetooth function on mobile phone and search for Bluetooth devices.
After searched, select “JF3 Freedom” in the Bluetooth device list.
4. Enter password or PIN No:”0000” on your mobile phone when prompted.
5. If required, after successful pairing, select “JF3 Freedom” in the Bluetooth device list
and press “connect”.
6. After successful connecting, the blue light blinks twice every 4 seconds.

Pairing with a Bluetooth Adapter (iSport or uSport)

1. Keep the Bluetooth adapter and headphones within 1 meter of each other
when pairing.
2. Put the headphones into pair mode as outlined above.
3. Plug the Bluetooth adapter into the iPhone or iPod and play a song.
4. The headphones and adapter will pair automatically (passcode of adapter
must be 0000)
5. After successful pairing and connecting, the blue (or red) light of headphones
blinks twice every 4 seconds.

Pairing with several Bluetooth devices

The headphones can connect with two devices at most. A mobile phone with
HFP profile; and a device with A2DP profiles. If you want to pair two Bluetooth
devices, please refer to the following steps.

1. Firstly, pair the headphones with the Bluetooth adapter
2. Disconnect the Bluetooth adapter from the iPhone or iPod
3. Pair and connect the headphones with the mobile phone
4. Reconnect the Bluetooth adapter, will connect with headphones automatically.

Not all the mobile phones support all the functions listed. Please refer to the instruction of your
mobile phone. When the volume is adjusted to max or min, you will hear a indication sound.
For some mobile phones, when you accept a call on the phone, the call will be sent to the
mobile phone. You can switch the call to headphones by using the center button on the
headphones or through the phone. Please refer to the instruction of your mobile phone for
further information.

Function

Status

Indication

Operation

Voice dial

Standby mode

Short tone

Press and hold center button for 2 seconds

Redial

Standby mode

Short tone

Double click center button

Volume up

Music/Call mode

NA

Short presses of Vol+ button

Volume Down

Music/Call mode

NA

Short presses of Vol - button

Answer Call

Incoming Call

Short tone

Press center button

Reject Call

Incoming Call

Short tone

Press and hold center button for 2 seconds

End Call

During Call

Short tone

Press center button

During Call

Short tone

Press and hold center button for 2 seconds

Mute

During Call

Dbl tone every 5 sec Double click center button

Unmute

During Call

NA

Double click center button

Switch b/w phone
& headset mode

For some of mobile phones, when they are playing music, the music will transmit to the
speaker of mobile phone. If this happens, select “transmit the sound through Bluetooth”
in the “setting” of music play interface, and then choose “JF3 Freedom” in the device list.
Please refer to the instruction of your mobile phone for further information. When the volume
of headphones is adjusted to max or min,you will hear a tone. Remote control
the function such as next track, previous track, etc require your mobile phone to support AVRCP.
Please refer to your mobile phone user manual or Bluetooth transmitter for further info.

Function

Status

Indication

Operation

Volume up

Music/Call mode

NA

Short presses of Vol+ button

Volume Down

Music/Call mode

NA

Short presses of Vol - button

Play/Pause

Music Mode

Short tone

Press center button

Next track

Music Mode

Short tone

Long press of Vol - button

Back track

Music Mode

Short tone

Long press of Vol + button

Charging LED Indicator

Status of headphones

Red light is on

Charging

Red light is off

Finished charging

Pairing LED Indicator

Status of headphones

red and blue alternating

Pair Mode

Blue double blink every 2 sec

Standby mode

Blue periodic blinking

Connected to device

Red periodic blinking

Low battery

Tone Indicator

Status of headphones

Two tones every 5 sec

Conversation mode and mic mute

Tone every 30 seconds

Low battery

JF3 Specifications

Bluetooth Version

V2.1 + EDR

Profile

Headset, handsfree, A2DP, AVRCP

Effective Range

10 meters (30 feet)

Working time

Music & calls up to 6 hours

Standy time

Up to 250 hours

Input voltage

DC 5A 100mA

Charging time

Approximately 2 hours

Dimensions

18 x 40 x 7.5 mm

Weight

Approx 16 g

+1.866.244.3399 | [email protected]

jaybirdgear.com

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications to device will void the user’s authority to operate the device. The battery is recycled. Do not dispose of the battery in fire, as it may cause explosion.

In the bo

x & first use

Pairing in detail

Pairing sev

er

al devic

es

Mak

ing a c

all

Sta

tus Ligh

t

W

arr

an

ty inf

orma

tion

Pairing & P

ow

er on/off

Pairing with adapt

er

Basic C

ommands

Pla

ying music

Specific

ations & c

ar

e

Power on/off

Push and hold center button for 3-5 seconds

Note

- If the pairing is not successful, switch off headphones by pushing the center
button for 3 seconds, and then re-pair according to the steps outlined above.
- After pairing is successful, paired devices will remember each other. Unless pairing
information is deleted, so there is no need to pair again.
- The headphones will connect with the latest paired device. If you want to pair with other
Bluetooth devices, switch off the Bluetooth function of the current Bluetooth device, and then
pair and connect it with the new Bluetooth device according to steps outlined above.

Note

Freedom does not support apt-X CD quality audio even though it’s offered on iSport or uSport.

Note

Mobile phones that support HSP and A2DP profiles simultaneously may block the
Bluetooth adapter from reconnecting to the headphones.

Key

Short push of adjacent button
Push and hold of adjacent button

Care and maintenance

Keep dry and do not store in a damp place
Do not put the product in direct sunlight for extended periods of time or in hot areas.
High temperature will shorten the life of the electronic device, destroy the battery, and
distort certain plastic.
Do not expose the product to extreme cold.
Do not disassemble the product.
Do not drop the headphones.
Do not use chemicals or detergent to clean the product.
If the product fails to work please contact JayBird support at jaybirdgear.com

Warranty

jaybirdgear.com/warranty

WARNING: Due to the isolating characteristics of these headphones do not use while driving,
riding a bike or where vehicular traffic is present, or in any other activity where failure to hear
surrounding sounds could be dangerous. Use of these headphones at excessive volumes
may cause permanent hearing damage. Always turn the volume down before use.
Take caution in regards to inserting objects into ear canal, use at own risk.

Copyright 2011 JayBird Gear LLC. All rights reserved. JayBird,
and the JayBird logo are trademarks of JayBird Gear LLC. Bluetooth is a trademark
owned by Bluetooth SIG, Inc. USA, and licensed to JayBird Gear LLC. iPhone is a
trademark of Apple, Inc., registered in the U.S. and other countries. Assembled in China

Sec

ur

e F

it

Sec

ur

e F

it

JF3 Freedom User Manual

Warranty, safety & support

jaybirdsport.com

+1.866.244.3399

EN 6

WHEN OUTDOORS USE AN ARMBAND (NOT YOUR POCKET)

Outdoors / gyms: Without walls or ceilings for the Bluetooth signal
to bounce off, your body can block the signal to the headphones.
For best signal performance, have your music device ABOVE waist
level on your RIGHT side.

ONE MORE SECURE FIT OPTION
To make sure all fitting preferences
are covered, earhooks are included
as an alternative secure fit option.

EN 7

EN 8

EN 9

EN 10

EN 11

EN 12

EN 13

EN 14

EN 15

EN 16

EN 17

EN 18

EN 1

EN 2

EN 3

EN 4

EN 5