beautypg.com

Autostick, Autostick operation, Autostick௡ operation – Dodge 2007 Magnum SRT8 User Manual

Page 216

background image

times. Follow the reset procedure described under “Tem-
porary Transmission Limp Home Mode” in this section.
In Permanent Limp Home Mode, P (Park), R (Reverse),
and N (Neutral) will continue to operate. Second gear
will operate in the D (Drive) shifter position. The mal-
function indicator light may illuminate.

AUTOSTICK

Autostick

௡ is a driver-interactive transmission that offers

manual gear shifting to provide you with more control of
the vehicle. Autostick

௡ allows you to maximize engine

braking, eliminate undesirable upshifts and downshifts,
and improve overall vehicle performance. This system
can also provide you with more control during passing,
city driving, cold slippery conditions, mountain driving,
trailer towing, and many other situations.

Autostick

Operation

By placing the selector lever in the D (Drive) position, it
can be moved from side to side. This allows the driver to
select a higher or lower range of gears. Moving the
selector lever to the Left (-) triggers a downshift and to

the Right (+) an upshift. The gear position will display in
the instrument cluster on the transmission range indica-
tor.

NOTE:

• In Autostick௡ mode, the transmission will only shift

up and down when the driver manually moves the
selector lever Right (D+) or Left (D-).

• An UPSHIFT message will appear in the Electronic

Vehicle Information Center (EVIC) portion of the in-
strument cluster when using Autostick

௡. This message

appears in order to alert the driver to upshift to the
next gear. The UPSHIFT message will display while
operating the vehicle at higher engine revolutions-per-
minute (RPM).

You can shift in or out of the Autostick

௡ mode at any time

without taking your foot off the accelerator pedal. When
you wish to engage Autostick

௡, simply move the selector

lever to the Right (D+) or Left (D-) while in the D (Drive)
position. The transmission will remain in the current gear
until an upshift or downshift is chosen. When you wish
to disengage Autostick

௡, hold the selector lever to the

STARTING AND OPERATING

215

5

This manual is related to the following products: