Induction Dynamics ID1.15 - Manual (Page 6)

6 Audio Perfection Realized
™
Amplifier Location
The A2 amplifier is best located in an equipment rack or shelving with other audio and
video equipment. It is not recommended for placement behind walls or other limited access
locations, where service may be restricted.
Carpet Spikes
Carpet spikes are not required with the ID1.15. However, they have been provided if you
would prefer to use them. Should you choose to do so, lay the ID1.15 on its back side, then
screw the carpet spikes into the threaded holes under the base of each speaker.
Speaker Wire
Use approved wire designed for in-wall or exposed use, as appropriate for your installation.
For the ID1.15, we recommend using high-quality speaker wire that is 12 gauge or lower,
with easily visible polarity coding to make your connections. The following chart identifies
minimum gauge requirements for various lengths. See your local dealer or installation
contractor for more information.