ikan EV2SK8 - Manual (Page 5)

www.ikancorp.com 713-272-8822
CONFIGURATION OF SETTING MENUS
VH8
8-inch HDMI Monitor QUICKSTART GUIDE
User programmable function keys. For quick
access, the user may program the F1, F2, F3 and
F4 buttons to enable frequently accessed monitor
features via the main monitor configuration menu.
This function recalls user defined values settings .The user setting will
remain in memory indefinitely and can be erased by using the reset option
in the main menu.
The DSLR Scaling1 function will allow users to extend their DSLR camera’s
HDMI video output any option of 3:2, 16:9 or Full Screen – convenience
made simple.
Turns off / on the touch sensitivity of the function keys.
Allows you to adjust the brightness of the LCD backlight.
Display a crosshair on the center of screen.
Allows to see the image in monochrome or only the red, blue, or green
channels.
The LCD panel in this display has a native display of 1600 x 768 pixels.
A signal of any other resolution is scaled to fit this native resolution. There
may be time when it is desired to view the incoming signal without scaling.
Enabling Pixel to Pixel mode turns off the scaling and displays a 1600 x
768 pixel window of the original image. Each pixel of the panel displays
one pixel of the original image. The user may use the scroll wheel on top of
the monitor to move the window left, right. Push the scroll wheel again to
toggle up and down.
The VH8 is equipped with Monochrome Peaking features which highlight
the desired focus area in a bright, red outline. The operator adjusts the
focus control until the red indicator outlines on the desired area are razor
sharp, indicating optimal focus. For the best results, be sure the subject is
properly exposed.
The False Color feature utilizes a full spectrum of assigned color indicators,
ensuring flawless shot exposure. As the camera Iris is adjusted, the subject
of the image will change color based on specific brightness values
indicating optimal exposure. See included chart for color assignments.
Only active when false color is enabled.
The VH8 offers adjustable upper Clip Guide levels to accurately display
overexposed images in any shooting condition. The operator simply
assigns the upper IRE to their preference and any exposure over the set
IRE limit will flash in a vivid purple, indicating only the over exposed area.
(Same As F2,
F3, and F4 Key)
GUIDES
Guides 16:9 OFF / 90% / 80% / 4:3
Guides 4:3 OFF / 90% / 80%
G. Background Normal / Half / Black
Crosshair Off / On
Return
VIDEO CONFIGURATION
Brightness 0-100
Contrast 0-100
Chroma 0-100
Sharpness 0-100
Tint
0-100
Color Temp. 5600K / 6500K / 9300K / Manual
Return
SYSTEM CONFIGURATION
OSD Language English / Français / Español / 简体中文
OSD Duration 5-60
Menu Setup User1-5
Backlight 0-100
Sense Key Off / On
DSLR Auto Scaling Off / Full / 16:9 / 3:2
System Reset
Return
FUNCTION SETUP
Luma Under Warn
Luma Over Warn
F1 Key Peaking
False Color
Clip Guide
Underscan
Check Field
Pixel
HV
Delay
Guides
Crosshair
EXIT
Notes:
1 DSLR Scaling (for HDMI only)
R 0-255
G 0-255
B 0-255
Exit