ikan HB160-GC - Manual (Page 2)

EV2Grip Handles HB160-GC
Rubberized Grip Handles 160mm Core w/15RDA
Quickstart Guide
www.ikancorp.com 713-272-8822
The ikan rubberized grip handles has a 160mm size solid metal cores that comes out on both ends
the handles. It also comes with the 15RDA ELEMENT piece already attached and a spring loaded
ratcheting thumb screw(s). Simply slide the handle onto a 15mm size rod and tighten the thumb
screw. The position of the handles can also be adjusted on the core, loosen the four screws on the
side of the handle, put the handle in the desired position and then tighten. If your handle is put in a
position to where you cannot loosen or tighten the thumb screw, pull up the thumb screw and adjust.
160mm
160mm