ikan ELE-LTTD - Manual (Page 3)

GETTING STARTED
To assemble your Large Table Top Dolly, place the Double Cheese Plate on a flat
surface with the “DBLPT” (part number) facing down. Next, Grab 1 pre-
assembled wheel and line up the screw holes with those of the Double Cheese
Plate. Next, insert 2 x Metric 4mm x 10mm Socket Head Cap Screws into the
holes as shown in the illustration and tighten using the 3mm Hex Key. Repeat
these steps for the remaining two pre-assembled wheels.
Large Table Top Dolly ELE-LTTD
QUICKSTART GUIDE
www.ikancorp.com 713-272-8822