ikan PT-TAB - Manual (Page 4)

Teleprompter Assembly
3. Finally, attach the tablet tray to the
frame by sliding the 15mm stud
mount into the teleprompter rod clamp
located on the top. Lock the tablet
tray into place using the thumbscrew.
1. Start by assembling the frame.
Use the teleprompter rod
clamps to join the 15mm rods
together. Use the thumbscrews
to tighten the frame.
2. Attach the frame to your 15mm
light weight support (LWS)
standard rig. Make sure the
frame is securely attached to
your rig before moving on to the
next step.
PT-TAB