IBEA B4-10Ah - Manual (Page 10)

GB ENGLISH
10
4. TECHNICAL DATA AND DECLARATION OF CONFORMITY
3. INFORMATION
Battery Characteristics:
IBEA batteries are Lithium-ion Polymer. After 1,000 charging
cycles, IBEA batteries can be charged to 80% of initial
capacity without, however, reducing the power delivered by
the battery during work.
It is preferable to partially drain the battery rather than fully.
Advantages:
1- They are less dangerous if they are damaged because
they contain a solid component (polymer) that is not
flammable.
2- They have no memory effect, so they can be charged at
any time without problems.
Disadvantages:
1- They can rapidly lose charge at low and high temperatures.
Motor Characteristics:
IBEA motors are Brushless (without brushes). Therefore, no
maintenance is required and, not having any rubbing contact,
the motor screw is theoretically infinite, with the exception of
the ball bearings.
have been tested by us with the listed standards EN 55022:2006, EN 61000-3-2:2006, EN 61000-3-
3:1995+A1:2001+A2:2005, EN 55024:1998+A1:2001+A2:2003 and found in compliance with the council EMC directive
2004/108/EC. It is possible to use CE marking to demonstrate the compliance with this EMC directive.
BATTERY (Lithium / Polymer)
WEIGHT
VOLTAGE
CAPACITY
STORED ENERGY
MINIMUM OPERATING LIFE
BATTERY CHARGE TIME
Battery life has been surveyed from actual working time without pause and with medium cut.
This may vary depending on the tool used and work to be performed.
36 V
10 Ah 15 Ah
B400 B600
3,5 Kg 5 Kg
360 Wh 540 Wh
1000 CYCLES
4 h
BA TT E R I E S
B800
6 Kg
20 Ah
720 Wh
ACTIVE s.r.l. Via Delmoncello 12 - 26037 San Giovanni in Croce (CR)
declares under our sole responsibility that the batteries brand IBEA:
BATTERY CHARGER
MAINS VOLTAGE
FREQUENCY
B4 / B6 B8
47 - 63 Hz
SSLCO84V42
100 - 240 V 100 - 240 V
50 - 60 Hz
ES-3604SL
ALBERTO GRIFFINI
PRESIDENTE
ACTIVE S.r.l.
Via Delmoncello, 12
26037 San Giovanni in Croce (CR) - ITALY
11/03/2014