IBASE IPPC1501-RE - Manual (Page 17)

Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
9 IBASE Technology Inc.
2.2 Installing the Memory
The IB895 board supports one DDR3 memory socket for a maximum total memory of
2GB or 4GB DDR3 memory type.
Note: IB895 with Intel Atom DC D2550 supports up to 4GB and IB895N with Intel
Atom DC N2600 supports up to 2GB.
Installing and Removing Memory Modules
To install the DDR3 modules, locate the memory slot on the board and perform the
following steps:
1. Hold the DDR3 module so that the key of the DDR3 module aligned with that on
the memory slot.
2. Gently push the DDR3 module in an upright position until the clips of the slot close
to hold the DDR3 module in place when the DDR3 module touches the bottom of
the slot.
3. To remove the DDR3 module, press the clips with both hands.