IBASE SI-83 User Manual
Page 44

36
SI-83 User Manual
USB Mass Storage Driver Support
Enable/Disable USB Mass Storage Driver Support.
Port 60/64 Emulation
Enables I/O port 60h/64h emulation support. This should be enabled for the complete USB
keyboard legacy support for non-USB aware OSes.
USB Transfer time-out
The time-out value for Control, Bulk, and Interrupt transfers.
Device reset tine-out
USB mass Storage device start Unit command time-out.
Device power-up delay
Maximum time the device will take before it properly reports itself to the Host Controller.
‘Auto’ uses default value: for a Root port it is 100ms, for a Hub port the delay is taken from
Hub descriptor.
NCT5523D HW Monitor
Aptio Setup Utility
Main
Advanced
Chipset
Boot
Security
Save & Exit
PC Health Status
→ ← Select Screen
↑↓ Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save ESC: Exit
Smart CPU_FAN1 function
Disabled
SYS Thermistor Temp
+37.0 C
CPU Diode Temp
+42.5 C
CPU_FAN Speed
4440 RPM
VCORE
+1.768 V
VDDQ
+1.520
Smart CPU_FAN1 Function
Smart Fan Mode select