IBASE SI-18 - Manual (Page 22)

22
BIOS Setup
This chapter describes the different settings available in the AMI BIOS that comes
with the board.
BIOS Introduction
The BIOS (Basic Input/Output System) installed in your computer system’s ROM
supports Intel processors. The BIOS provides critical low-level support for a standard
device such as disk drives, serial ports and parallel ports. It also password protection
as well as special support for detailed fine-tuning of the chipset controlling the entire
system.
BIOS Setup
The BIOS provides a Setup utility program for specifying the system configurations
and settings. The BIOS ROM of the system stores the Setup utility. When you turn on
the computer, the BIOS are immediately activated. Pressing the key
immediately allows you to enter the Setup utility. If you are a little bit late pressing the
key, POST (Power On Self-Test) will continue with its test routines, thus
preventing you from invoking the Setup. If you still wish to enter Setup, restart the
system by pressing the ”Reset” button or simultaneously pressing the ,
and keys. You can also restart by turning the system Off and back On again.
The following message will appear on the screen:
Press to Enter Setup
In general, you press the arrow keys to highlight items, to select, the
and keys to change entries, for help and to quit.
When you enter the Setup utility, the Main Menu screen will appear on the screen.
The Main Menu allows you to select from various setup functions and exit choices.