IBASE SI-38 - Manual (Page 15)

15
Installation
Installing CPU
The SI-38 (IB938 board) supports PGA-722 socket for AMD R-Series 32nm QC/DC
APU. (The maximum TDP supported is 35W)
The processor socket comes with a screw to secure the processor. As shown in the
left picture below, loosen the screw first before inserting the processor. Place the
processor into the socket by making sure the notch on the corner of the CPU
corresponds with the notch on the inside of the socket. Once the processor has slid
into the socket, fasten the screw. Refer to the figures below.