IBASE SI-28 - Manual (Page 30)

30
Power Management Setup
ACPI Suspend Type
The default setting of the ACPI Suspend mode is S1(POS).
C2 Disable/Enable
The default setting of this field is Disabled.
Power Management Option
This field allows you to select the type of power saving management modes. There
are four selections for Power Management.
Min. Power Saving: Minimum power management
Max. Power Saving: Maximum power management.
User Define: Each of the ranges is from 1 min. to 1hr. Except for
HDD Power Down which ranges from 1 min. to 15 min.
HDD Power Down
When enabled, and after the set time of system inactivity, the hard disk drive will be
powered down while all other devices remain active.
Video Off Option
This field sets the video off option. By default, video goes into suspend state and
then Off.