Mounting ami200 to the wall, Wall mounting requirements – IBASE AMI200 User Manual
Page 17
17
Mounting AMI200 to the Wall
Using attached mounting rail, you can install AMI200 on wood, drywall surface over
studs, or a solid concrete or metal plane. Ensure the installer uses at least four M4
length 8mm screws to secure the system on wall. Six M4 length 8mm screws are
recommended to secure the system on wall.
Fasteners are not included with the unit, and must be supplied by the installer. The
types of fasteners required are dependent on the type of wall construction. Choose
fasteners that are rated either
”Medium Duty“ or ”Heavy Duty.“ To assure proper
fastener selection and instal
lation, follow the fastener manufacturer’s
recommendations.
Wall mounting requirements
Note: Before mounting the system on wall, ensure that you are following all
applicable building and electric codes.
When mounting, ensure that you have enough room for power and signal cable