Ib102 hardware specifications, Ib102 features – IBASE IB102 User Manual
Page 7

7
IBASE Technology Inc.
1.2. IB102 Hardware Specifications
IB102 Features
1080p hardware encode/decode ability.
OpenGL ES 2.0 and OpenVG 1.1 hardware accelerators
1GB DDR3, 4GB eMMC, LED light bar on board
10/100/1000 M-bit Ethernet
Supports 12V DC-IN or POE+
Supports RS232/422/485, USB-OTG, SD slot
Supports LVDS panel resolution up to 1366x768
Supports Linux3.0, Android 4.3
FEATURES
IB102
Form Factor
150mm x 165mm
CPU Type
Freescale i.MX6 Solo Core Coretex-A9 on Board
CPU Speed
1GHz
Memory Socket
DDR3 1GB on Board
VGA Controller
IPU v3H IPU Engine
Watchdog Timer
By Hardware
Edge IO
10/100/1000 LAN x1 (RJ45 connector with POE+ support )
USB x 1 (USB Host. A-Type)
USB OTG x 1 (mini AB type)
COM1 RS-232/422/485 x 1
Dip switch x 1 (for 232/485 selection)
SD card slot x 1
Reset button x1
12V DC-IN Jack x 1,
Internal Headers
LVDS Connector x 1
GPIO x (10pin, pitch 2.0 with 3.3V, refer to RP100)
Audio pin Header x3
I2C connector x1
Battery: BR2032 with socket
Expansion Slots
miniPCIE x1 ( with USB support)
Others
LEDs light bar x 1 (3xGPIO pin control Red, Orange and Green)
Operating
temperature
0~60 degree
SW Support
Ubuntu Linux 11.10 ( kernel 3.0)
Android 4.3
‧
This specification is subject to change without prior notice.