IBASE IB945 User Manual

Page 29

BIOS SETUP

IB945 User’s Manual

To set the date, highlight the “Date” field and use the PageUp/
PageDown or +/- keys to set the current time.

Time
The time format is:

Hour : 00 to 23

Minute : 00 to 59

Second : 00 to 59

To set the time, highlight the “Time” field and use the /
or +/- keys to set the current time.

IDE Channel Master/Slave
IB945F with ICH10DO supports 6 Serial ATA connectors

The onboard Serial ATA connectors provide Primary and Secondary
channels for connecting up to four Serial ATA hard disks . Each channel
can support up to two hard disks; the first is the “Master” and the second
is the “Slave”.

Press to configure the hard disk. The selections include Auto,
Manual, and None. Select ‘Manual’ to define the drive information
manually. You will be asked to enter the following items.

Capacity :

Capacity/size of the hard disk drive

Cylinder :

Number of cylinders

Head :

Number of read/write heads

Precomp :

Write precompensation

Landing Zone : Landing zone
Sector :

Number of sectors

The Access Mode selections are as follows:
CHS

(HD < 528MB)

LBA

(HD > 528MB and supports Logical Block Addressing)

Large

(for MS-DOS only)

Auto