IBASE IB889 - Manual (Page 10)

INSTALLATIONS
6 IB889 User’s Manual
Installing the Memory
The IB889 board supports a DDR3 memory socket for a maximum total
memory of 4GB in DDR3 800 memory type.
Installing and Removing Memory Modules
To install DDR3 modules, locate the memory socket on the board and
perform the following steps:
1. Hold the DDR3 module so that the keys of the DDR3 module align
with those on the memory slot.
2. Gently push the DDR3 module in an angle as shown in the picture
below until the clips of the sockets lock to hold the DDR3 module in
place when the DDR3 module touches the bottom of the socket.
3. To remove the DDR3 module, press the clips with both hands.