IBASE IB905 User Manual

Page 24

BIOS SETUP

IB905 User’s Manual

BIOS Introduction

The BIOS (Basic Input/Output System) installed in your computer
system’s ROM supports Intel processors. The BIOS provides critical
low-level support for a standard device such as disk drives, serial ports
and parallel ports. It also password protection as well as special support
for detailed fine-tuning of the chipset controlling the entire system.

BIOS Setup

The BIOS provides a Setup utility program for specifying the system
configurations and settings. The BIOS ROM of the system stores the
Setup utility. When you turn on the computer, the BIOS is immediately
activated. Pressing the key immediately allows you to enter the
Setup utility. If you are a little bit late pressing the key, POST
(Power On Self Test) will continue with its test routines, thus preventing
you from invoking the Setup. If you still wish to enter Setup, restart the
system by pressing the ”Reset” button or simultaneously pressing the
, and keys. You can also restart by turning the
system Off and back On again. The following message will appear on
the screen:

Press ~~or to Enter Setup~~

In general, you press the arrow keys to highlight items, to
select, the and keys to change entries, for help
and to quit.

When you enter the Setup utility, the Main Menu screen will appear on
the screen. The Main Menu allows you to select from various setup
functions and exit choices.