IBASE MB967-FT - Manual (Page 15)

INSTALLATIONS
MB967-FT User’s Manual 15
Jumper Settings on MB967-FT
JP2: Clear CMOS Contents
Use JP2 to clear the CMOS contents. Note that the ATX-power connector
should be disconnected from the board before clearing CMOS.
JP3 Setting Function
Pin 1-2
Short/Closed
Normal
Pin 2-3
Short/Closed
Clear CMOS
JP3: Clear ME RTC Contents
JP3 Setting Function
Pin 1-2
Short/Closed
Normal
Pin 2-3
Short/Closed
Clear ME RTC
JP4: Watchdog Reboot (WDT) Select
JP7: Flash Descriptor Security Override
(ME BIOS Update Jumper)
JP7 Setting Function
Open
Disable
(Default)
Short/Closed Enable to update BIOS
JP4 Setting Function
Pin 3-4
Closed
System will reboot upon the
time out of watchdog timer.
Pin 3-4 Open Watchdog function Disabled