Jp1 setting function, Pin 1-2 short/closed, Normal – IBASE MB837-D25 User Manual
Page 14: Pin 2-3 short/closed, Clear cmos, Installations 8
INSTALLATIONS
8
MB837-D25 / MB837-D25-R User’s Manual
Jumper & Connector Location on MB837-D25 / MB837-D25-R
JP1: Clear CMOS Contents
Use JP1 to clear the CMOS contents.
Note that the power connector or jack should be disconnected from the board
before clearing CMOS.
JP1
Setting
Function
Pin 1-2
Short/Closed
Normal
Pin 2-3
Short/Closed
Clear CMOS
This manual is related to the following products: