Graphics configuration, Bios setup, Mb968 user’s manual – IBASE MB968 User Manual
Page 52: Chipset
BIOS SETUP
MB968 User’s Manual
52
Graphics Configuration
Aptio Setup Utility
Main Advanced
Chipset
Boot
Security
Save & Exit
Graphics Configuration
→ ←
Select Screen
↑↓
Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save ESC: Exit
IGFX VBIOS Version
2164
IGfx Frequency
Graphics Turbo IMON
700 MHz
31
Primary Display
[Auto]
Internal Graphics
[Auto]
GTT Size
[2MB]
Aperture Size
[256MB]
DVMT Pre-Allocated
[32M]
DVMT Total Gfx Mode
Gfx Low Power Mode
Graphics Performance
[256M]
[Enabled]
[Disabled]
► LCD Control
Primary Display
Select which of IGFX/PEG/PCI graphics device should be primary
display or select SG for switchable Gfx.
Internal Graphics
Keep IGD enabled based on the setup options.
DVMT Pre-Allocated
Select DVMT 5.0 Pre-Allocated (Fixed) graphics memory size used by
the internal graphics device.
DVMT Total Gfx Mem
Select DVMT 5.0 total graphics memory size used by the internal
graphics device.
Gfx Low Power Mode
This option is applicable for SFF only.
Primary IGFX Boot Display (LCD Control)
Select the Video Device that will be activated during POST. This has no
effect if external graphics present. Secondary booty display selection
will appear based on your selection. VGA modes will be supported only
on primary display.