IBASE MI959 - Manual (Page 35)

BIOS SETUP
MI959 User’s Manual 31
Boot Settings
This section allows you to configure the boot settings.
Aptio Setup Utility
Main Advanced Chipset Boot Security Save & Exit
Boot Configuration
→ ←
Select Screen
↑↓ Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save
ESC: Exit
Setup Prompt Timeout 1
Bootup NumLock State On
Quiet Boot Disabled
Fast Boot Disabled
CSM16 Module Version 07.69
GateA20 Active Upon Request
Option ROM Messages Force BIOS
INT19 Trap Response Immediate
CSM Support Enabled
Boot Option Priorities
Boot Option #1 SATA PM: WDC WD80 …
► CSM parameters
Setup Prompt Timeout
Number of seconds to wait for setup activation key.
65535(0xFFFF) means indefinite waiting.
Bootup NumLock State
Select the keyboard NumLock state.
Quiet Boot
Enables/Disables Quiet Boot option.
Fast Boot
Enables/Disables boot with initialization of a minimal set of devices
required to launch active boot option. Has no effect for BBS boot
options.
GateA20 Active
UPON REQUEST
– GA20 can be disabled using BIOS services.
ALWAYS
– do not allow disabling GA20; this option is useful when any
RT code is executed above 1MB.
Option ROM Messages
Set display mode for Option ROM. Options are Force BIOS and Keep
Current.