IBASE MI946 - Manual (Page 45)

BIOS SETUP
MI946F User’s Manual 41
Advanced Chipset Settings
This setting configures the north bridge, south bridge and the ME
subsystem. WARNING! Setting the wrong values may cause the system
to malfunction. -
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Security
Chipset
Exit
Advanced Chipset Settings
Configure North Bridge
features.
<- Select Screen
↑↓ Select Item
+- Change Field
Tab
Select Field
F1 General Help
F10 Save and Exit
ESC Exit
WARNING: Setting wrong values in below sections
may cause system to malfunction.
► North Bridge Configuration
► South Bridge Configuration
► ME Subsystem Configuration
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Security Chipset Exit
North Bridge Chipset Configuration
Disabled
15MB-16MB
<- Select Screen
↑↓ Select Item
+- Change Field
Tab
Select Field
F1 General Help
F10 Save and Exit
ESC Exit
Memory Hole [Disabled]
Boots Graphic Adapter Priority [PCI/IGD]
Internal Graphics Mode Select [Enabled, 32MB]
Max TOLUD [3G Bytes]
Gfx Low Power Mode [Disabled]
PEG Port Configuration
PEG Port [Auto]
► Video Function Configuration
Memory Hole
This option is used to reserve memory space between 15MB and 16MB
for ISA expansion cards that require a specified area of memory to work
properly.
Boots Graphics Adapter Priority
This option is used to select the graphics controller used as the primary
boot device. Select either an integrated graphics controller (IGD) or a
combination of PCI graphics controller, a PCI express (PEG) controller
or an IGD.