Hyundai 2008 Santa Fe - Manual (Page 142)

1 FEATURES OF YOUR HYUNDAI
130
OCM052155A
Cool Warm
B670E02A-AAT
Temperature Control
This control is used to adjust the degree of
heating or cooling desired.
OCM052107A
Off-Level
Air is discharged through the windshield
defroster nozzle, side defroster nozzle and
side ventilator.
NOTE:
If the air flow control is off, the air intake
control is set to the fresh mode auto-
matically.
HEATING CONTROLS
B690A01CM-AAT
For normal heating operation, set the air
intake control to the fresh air (
) posi-
tion and the air flow control to the floor
(
) position.
For faster heating, the air intake control
should be set in the recirculate (
)
position.
If the windows fog up, set the air flow
control to the defrost ( ) position and the
air intake control to the fresh air (
)
position.
For maximum heat, move the temperature
control to "Warm".
OCM052152A