Hyundai 2011 Tucson - Manual (Page 193)

Features of your vehicle
112 4
■ Voice Recognition Activation
• The voice recognition engine con-
tained in the Bluetooth ® System can be
activated in the following conditions:
- Button Activation
The voice recognition system will be
active when the
button is pressed
and after the sound of a Beep.
- Active Listening
The voice recognition system will be
active for a period of time when the
Voice Recognition system has asked
for a customer response.
• The system can recognize single dig-
itsfrom zero to nine while number
greater than ten will not be recognized.
• If the command is not recognized, the
system will announce "Pardon" or No
input voice signal from microphone.
(No response)
• The system shall cancel voice recogni-
tion mode in following cases : When
pressing the
button and saying
cancel following the beep. When not
making a call and pressing the
but-
ton. When voice recognition has failed
3 consecutive times.
• At any time if you say “help”, the sys-
tem will announce what commands are
available.
■ Menu tree
The menu tree identifies available voice
recognition Bluetooth
® functions.
Pair phone
Select phone
Change priority
Delete phone
Bluetooth off
Setup
Add entry Phonebook
Change
Delete name
By Phone
By voice
Call By name
By number
✽ ✽ Tip
■ Voice Operation
To get the best performance out of the
Voice Recognition System, observe the
followings:
- Keep the interior of the vehicle as
quiet as possible. Close the window
to eliminate surrounding noise
(traffic noise, vibration sounds,
etc), which may disturb recogniz-
ing the voice command correctly.
- Speak a command after a beep
sound within 5 seconds. Otherwise
the command will not be received
properly.
- Speak in a natural voice without
pausing between words.
- While receiving voice commands,
press the button on the steer-
ing wheel remote controller to ter-
minate guidance. Voice command
will convert back to waiting mode
to allow the user to say a new voice
command.