Hyundai 2012 Sonata - Manual (Page 232)

Features of your vehicle
150 4
VOICE COMMAND
Starting Voice Command
• To start voice command, shortly press
the key on the steering wheel
remote controller.
• If voice command is in [Normal Mode],
then the system will say “Please say a
command. Beep”
❈ If voice command is in [Expert Mode],
then the system will only say a “Beep-”
❈ Setting Voice command [Normal
Mode]/[Expert Mode]:
Press the
key Select [System]
through the TUNE knob or
key Select [Voice Command Mode]
through the
TUNE knob Set
[Normal Mode]/[Expert Mode]
• Say the voice command.
5
SETUP
CAUTION
For proper voice recognition, say
the voice command after the guid-
ance message and the “Beep”
sound.
(Continued)
After downloading Bluetooth con-
tacts, the system requires some
times to convert the contacts into
voice information. During this
time, voice recognition may not
operate properly.
Upon inputting your contacts,
special symbols and numbers
cannot be recognized by voice.
For example, “# John Doe%&” will
be recognized as “John Doe”.
CAUTION IN USING
VOICE COMMAND
• The voice recognition feature of
this product supports recognition
of the commands listed within
this user’s manual.
While using voice recognition, oper-
ating the steering remote control
or the device will terminate voice
recognition and allow you to man-
ually operate desired functions.
Position the microphone above the
head of the driver’s seat. For superi-
or performance, maintain good pos-
ture when saying voice commands.
Voice recognition may not func-
tion properly due to outside
noise. The following conditions
can affect the performance of
Voice Recognition:
- When the windows and sunroof
are open
- When the heating/cooling sys-
tem is on
- When passing a tunnel
- When driving on rugged and
uneven roads
(Continued)