Turn signal/multifunction lever, Turn and lane-change signals, Turn – Hummer 2005 H2 User Manual
Page 147: Signal/multifunction lever

Turn Signal/Multifunction Lever
The lever on the left side of the steering column
includes the following:
•
G
Turn and Lane Change Signals
•
3
Headlamp High/Low-Beam Changer
•
Flash-to-Pass Feature
•
NQ
Windshield Wipers
•
J
Windshield Washer
•
I
Cruise Control
Turn and Lane-Change Signals
The turn signal has two upward (for right) and
two downward (for left) positions. These positions
allow you to signal a turn or a lane change.
To signal a turn, move the lever all the way up or down.
When the turn is finished, the lever will return
automatically.
To signal a lane change, just raise or lower the lever until
the arrow starts to flash. Hold it there until you complete
your lane change. The lever will return by itself when you
release it.
An arrow on the instrument
panel cluster will flash in
the direction of the
turn or lane change.
As you signal a turn or a lane change, if the arrows flash
more quickly than normal, a signal bulb may be burned
out and other drivers won’t see your turn signal.
3-7