Osd menu, Connection instructions, Care of the unit – HuddleCamHD 10x 720 User Manual
Page 11
Ver 1.1 1/30/15
11.
Pan/Tilt Function Zone
L-Limit: Set left boundary limit scanning position
Scan: Enable Boundary Scanning (Auto Panning)
R-Limit: Set right boundary limit scanning position
Home: Go to camera’s Home position
Tour: Enable automatic patrol tour of presets
Rev: Enable image flip for ceiling mounting
OSD MENU……………………………………………………………………………………………..
There is no On Screen Display for the HuddlecamHD 10X 720.
Connection Instructions………………………………………………………………………
1.
Connect included Power Supply to the camera.
2.
Wait for camera to come to Home Position.
3.
Connect included USB 2.0 cable to camera and USB port of PC.
4.
Select and configure camera in your software of choice.
NOTE: Failure to follow this sequence may result in no connection to PC.
Care Of The Unit…………………………………………………
Remove dust or dirt on the surface of the lens with a blower (commercially
available).