Durst Rhopac 160 - Manual (Page 2)

Durst Phototechnik
AG
Large Format Division
Vittorio-Veneto-Straße 59
I-39042 Brixen, Italy
Telefon +39 04 72 81 01 11
Telefax +39 04 72 83 09 80
www.durst-online.com
[email protected]
Durst Phototechnik
Digital Technology
GmbH
Julius-Durst-Straße 11
A-9900 Lienz, Austria
Telefon +43 48 52 7 17 77
Telefax +43 48 52 7 17 77 50
www.durst-online.com
[email protected]
The latest technical developments
are constantly being incorporated
into Durst products. Illustrations and
descriptions are therefore subject to
modification. All rights reserved on
images and illustrations.
© Durst Phototechnik AG, 03/2008
IX21055
Technical Data
Media specifications
Wide range of uncoated and
coated materials – also textured
surfaces such as hard foam sheets,
soft foam sheets, aluminium,
acrylic glass, cardboard sheets,
corrugated sheets, etc.
Maximum printing width:
160 cm (62 in.)
Maximum printing length:
Only restricted by media length
Maximum thickness:
Standard POP Media 40 mm
(1.58 in.);
Corrugated Media 1.5 mm to 5 mm
(0.06 in. to 0.2 in.)
Maximum media weight on belt:
Up to 20 kg
Smallest sheet size:
Standard POP Media DIN-A3,
29.7 x 42 cm (12 x 17 in.);
The minimum board size for
corrugated media in x-direction is
90 cm (36 in.) and in y-direction
45 cm (18 in.)
Maximum Corrugated Board
Warp/Bent:
2 cm (0.8 in.)
Registration of materials:
Materials are registered at the
leading edge by means of fibre
optic sensors. An encoder measures
the transport sequences, ensuring
utmost precision in image
alignment.
General specifications
Dimensions:
Width: 380 cm (150 in.)
Length: 440 cm (173 in.)
Height: 173 cm (68 in.)
Weight:
Approx. 1.700 kg (3.750 lb)
Safety standards:
Complies with currently valid
guidelines
Location requirements
Space requirement:
min. 6 x 6 m (20 x 20 ft.)
Maximum height:
2.400m (8.000 ft) above sea level
Temperature range:
+15 °C to +30 °C (+59 °F to 86 °F)
non-condensing
Relative air humidity:
25 - 80%, non-condensing
Printing specifications
Printing system:
Patented Durst flatbed system
with Quadro® Array technology for
the finest quality and the highest
speed
Resolution:
600 dpi
Colours:
Standard: CMYK
Optional: White, clear varnish for
special effects, spot colours
(on request) or light colours (light
magenta and light cyan)
Inks:
UV-curable pigment inks for
interior and exterior applications
Ink supply:
Integrated ink tanks with 10 litre
capacity per ink, refillable during
the printing process.
The refill inks are in 5 litre, non-
returnable containers, easily
disposed in collapsed condition,
thus avoiding pollution to the
machine and the environment.
Software/RIP:
Durst Rho Linux software for very
fast processing with minimum
storage capacity on the hard
disk. External Caldera RIP Server
(GrandRip+)
Productivity:
up to 25 m 2 /h (270 ft 2 /h)