Hypertherm MAXPRO200 Preventive Maintenance Program - Manual (Page 8)

4 MAXPRO200 Preventive Maintenance Program Instruction Manual 808800
Cleaning and inspection schedule
In general, Daily and weekly tasks are tasks that the operator might perform while the monthly tasks are more likely to be
performed by maintenance personnel.
Table 1
Maintenance Task or Activity Daily Weekly Monthly
Verify inlet pressures X
Inspect all air filters X
Verify coolant level and condition X
Inspect and lubricate o-rings X
Inspect the water tube and torch for damage X
Inspect hoses and leads X
Inspect for gas leaks X
Verify coolant flow X
Check coolant level X
Clean inside the power supply X
Check for coolant system leaks X
Inspect the main contactor X
Perform coolant flow test X
Inspect gas line connections X
Inspect for hose restrictions X
Inspect cables X
Inspect the ground connections X
Inspect the table-to-workpiece connection X