Hypertherm THC Plasma Interfacer Upgrade - Manual (Page 2)

Page 1 128503 Kit Instructions
command THC Plasma Interface Upgrade
To replace the plasma interface assembly or the interface PCB, the command THC must be upgraded with a
new plasma interface assembly. The upgrade requirements include installing the new plasma interface
assembly, installing 2 new control module microprocessors and recalibration of the THC system.
MAX200, HT2000 and HT2000LHF Initial Height Sensing (IHS)
Initial height sensing (IHS) for the MAX200, HT2000 and HT2000LHF systems can now be accomplished
using the new Command THC torch Ohmic Contact Sensing function. To take advantage of this
enhancement, you will need a new torch retaining cap and a THC ohmic contact wire. See the applicable
setup section of the instruction manual (802780) included with this kit for parts and installation requirements.
PURPOSE
128408 KIT CONTENTS
Command THC
Instruction Manual
Command THC
Instruction Manual
128494 Command THC Plasma Interface Assembly
802780 X-Y Command THC Instruction Manual
8022510 Robotic Command THC Instruction Manual
081029 Real Time Microprocessor
081030 Interface Microprocessor
380.05