HONDA 2010 CR-V - Manual (Page 96)

Unlocks the driver’s door or all doors
and tailgate when the ignition switch is
moved out of the ON (II) position.
driver’s door unlock
feature.
all doors and tailgate
unlock feature
Unlocks the driver’s door or all doors
and tailgate when the shift lever is
moved into the Park (P) position with
the brake pedal depressed.
Make sure the shift lever is in the
Park (P) position.
Turn the ignition switch to the ON
(II) position, and make sure to
close the driver’s door.
Push and hold the rear of the
master door lock switch on the
driver’s door. You will hear a click.
Continue to hold down the switch:
Until you hear another click
(after about 5 seconds) to
activate
Or, until you hear two more
clicks (after about 10 seconds)
to activate
.
Release the switch, and within 20
seconds, turn the ignition switch
to the LOCK (0) position.
Turn the ignition switch to the ON
(II) position, and make sure to
close the driver’s door.
Make sure the shift lever is in the
Park (P) position. 1.
2.
1.
2.
3.
4.
To program the Ignition Switch
Unlock mode: To program the Park Unlock mode:
Door Locks
90
09/07/16 18:00:09 31SWA630_095