Hoist Fitness CL-2412 - Manual (Page 14)

A S S E M B LY
I N S T R U C T I O N S
F R A M E A S S E M B L Y
Step 2d
FITNESS SYSTEMS
R
HOIST
In this step start by attaching (1) to the Weight Assy. (prior to
attaching (CK)). Next secure two (CG) and (27) to (5) Pulley Bracket.
Use a Seat Clamp On tool to secure all brackets. (Fig.1) Slide (CK) into
the top slot of (1). (Fig.2) Loop the end of (CK) and feed it back up
through the slot, keeping the loop open. (Fig.3) Next, slide (38) through
(CK) and line up the holes, then secure to (1). Next, attach the belt by
bringing it up through the hole on (5). See on page 14.
bolts.
Detail Belt Set-Up
Wrench tighten
1 - Belt Anchor, Adjustable
Part Descriptions
G - 3/8-16 x 1 ¾” Button Head Screw
M - 1/4-20 x 1 1/2” Socket Head Cap Screw
P - 1/4-20 x 1” Button Head Screw
AD - 3/8” Internal Lock Washer
AJ - 3/8” Flat Washer
AM - 1/4” Internal Lock Washer
BB - Serrated Hex Nut
CG - 3 1/4” Pulley
CK - Cam Belt
CL - 2” x 2” End Cap
Hardware Descriptions
2412 Assembly
Page 13