Hoist Fitness CF-3753 - Manual (Page 23)

NOTE:
- WRENCH TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
- WRENCH TIGHTEN ALL HARDWARE FROM
PREVIOUS STEPS.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY
* IF MACHINE WAS PURCHASED PRE-
ASSEMBLED, REMOVE COUNTER-WEIGHT
RETAINING PULL-PINS (79) NOW.
FRAME ASSEMBLY
OWNER'S MANUAL
CF-3753 ASSEMBLY PAGE 22
*IMPORTANT*
NOW THAT THE CF-3753 IS COMPLETELY ASSEMBLED TAKE TIME TO
ASSURE THAT YOUR UNIT IS ASSEMBLED SQUARE AND PERPENDICULAR. USE A LEVEL
TO CHECK THAT THE GUIDE RODS ARE PERPENDICULAR IN BOTH DIRECTIONS.
IF THEY ARE NOT PERPENDICULAR IN BOTH DIRECTIONS, IT WILL BE NECESSARY TO
LOOSEN SOME FRAME HARDWARE TO RE-ALIGN THE FRAME AND RETIGHTEN BOLTS.
2
27
27
16
28
52 67 63
16
79
*
79
79
*
*