Daewoo DV-600 - Manual (Page 32)

31
FUNCTION SETTING
CAPTIONS
The hidden subtitle is shown or turned off.
SCREEN SAVER
Start the screen saver, the screen saver image appears when the unit stops or the
image is motionless for a few minutes. This saver can keep the screen from being
damaged.
DIGITAL OUT
• OFF
No signal is output from the coaxial, optical port.
• BITSTREAM
Select this when the DVD player is connected with a power amplifier through
optical or coaxial port. Please refer to the page 14. when a Dolby Digital DVD, DTS
DVD or MPEG DVD is played, select this, the coaxial or optical port will output in
the corresponding digital format (source code). The power amplifier to be
connected must have Dolby Digital, DTS and MPEG DVD is played, the optical or
coaxial port will output in PCM 2-channel format.
• PCM
Select this when the DVD player is connected with a TV or a power amplifier
through an audio cord.
DOLBY DIGITAL SETUP
DUAL MONO
This is the output mode of the L and R signals of the set audio output. If it is set to
"MIX– MONO", the function only works when the DVD being played is 2.0-channel.
• STEREO
Choose this option, the audio output should be a dummy stereo signal.
• L–MONO
• R–MONO
• MIX–MONO
DYNAMIC RANGE
Set "OFF" to view a program in the dynamic range as recorded in the
disc. If you hear loud sounds softer and soft sounds louder, set "FULL".
– – FULL
– –
– – 3/4
– –
– – 1/2
– –
– – 1/4
– –
– – OFF