beautypg.com

Save these instructions, Important safeguards, Unpacking & inspection – Dualit Steam Station Iron User Manual

Page 3

background image

Do not direct the steam towards

people or animals (danger of

scalding). Avoid steam contact with

unprotected skin.

Switch off when not in use & unplug

from the mains. Do not leave the

appliance switched on unnecessarily.

Never leave the iron unattended

when it is connected to the mains.

To guard against accidents, a faulty

mains cable may only be replaced by

the manufacturer, service agent or

similarly qualified person.

The iron must be used and rested on

a stable surface.

When placing the iron on its stand,

ensure that the surface on which the

stand is placed is stable.

The iron is not to be used if it has

been dropped, if there are visible

signs of damage or if it is leaking.

The pressure release valve (12) is an

excess pressure seal. Never replace

this with any other type of seal.

Steam and boiling water could escape

from the unit. DO NOT OPEN the

tank seal (12), until the water reservoir

(14) has cooled down to room

temperature.

N

NE

EV

VE

ER

R try to fill the pressure steam

unit through the tank seal (12). This

is only for cleaning.

SAVE THESE
INSTRUCTIONS

Unpack the unit and components from the
shipping container.

Remove all visible packing material. If any
damage is discovered, contact place of
purchase or Dualit Ltd on 01293 652 500.

3

IMPORTANT SAFEGUARDS

STEAM STATION

UNPACKING & INSPECTION

Steam stations are made up of two

main components: a container that

holds the water for steam ironing and

an iron without a water tank.

The main body has a heating element

that boils the water and a valve that lets

the steam through a hose into the iron.

An electric cord for the soleplate

combined with a rubber hose for the

steam supply connect the two

components.

The thermostat for the iron soleplate is

located on the iron the same place as

for conventional irons and there’s a

steam pulse button that you press for

steam ironing.

Vertical steaming is possible due to this

component arrangement, which is ideal

for ironing and freshening up curtains

and suits.

16 12 05_quark file for steam station.qxp 1/31/2006 14:18 Page 3