Chapter 2. installing and set up – HiTi P720L User Manual
Page 9

English
HiTi P720L user manual
Chapter 2. Installing and Set Up
2 - 4
1. Connect the USB cable from the personal
computer to the USB connector located on the
right rear side of the printer.
Be sure to insert the USB cable all the way.
Attention: To remove the USB cable, make sure that the printer is in the waiting status.
Removing the USB cable during data transfer may not be able to print data correctly and
cause waste.
ƦConnecting USB Cable
This manual is related to the following products: